Ball valve XF83512

This product should be used under the following conditions:

1.Working pressure: ≤1.0 MPa (Note: The working pressure required by customers may differ from that of valves. When using the working pressure, it must not exceed the working pressure printed on the valve body and handle of our company’s products).

2.Applicable media: oil, water, and gas (steam) without corrosive and particulate impurities. When impurities exist in the media, filter valves should be installed at the front of the pipeline.

3.Working temperature range: 0-101°C. At low temperatures, the medium shall be liquid or gaseous, and no ice or solid particles shall exist in the medium.

Installation considerations:

Please select the valve according to the working conditions. If the valve is used beyond the scope of technical specifications, it may damage or even burst. Alternatively, although the valve may still function normally, its service life may be shortened.

Choose the appropriate tool (wrench) according to the size of the valve during installation, and fix the end of the assembly thread to avoid stressing the valve body. Excessive installation torque may cause valve damage.

Expansion joints or expansion bends should be installed for long pipelines to eliminate the stress imposed on valves by thermal expansion and contraction of pipelines.

The front and rear ends of the valves should be fixed to prevent the valve from being damaged by bending stress due to the weight of pipes and media.

Valves should be in the fully open state during installation. When the pipeline is flushed and installed, the valves can enter the working state.